background image

Jigsaw provide the solution piece by piece

Feel the Future of Heating. Step out of the Shade and into the Sun

18

19

HEATING ADVICE

WARRANTY INFORMATION

Saving Energy

Infrared heating is different to convection heaters. Infrared can feel 
warmer at lower temperatures. It is advisable to heat a room to around 
19º to determine if this is comfortable before raising the temperature. 
This is best for high use rooms such as living rooms and kitchens.

Keeping these rooms at an average will ensure that the heater will be 
used to “top-up” the heating when they are required to do so.

Only heating the rooms you are using is another positive way of saving 
energy and therefore money on your bills. Setting these unused rooms 
at a base rate of 16/17º will allow the room to stay warm until they are 
required to be boosted to 19º. This is perfect for bedrooms, offices and 
spare rooms.

Sizing the Heaters

Always follow the guidelines on our website for measuring the heat 
loss of your home. A heater that is too small will not heat the room 
efficiently. There is a potential to shorten the life of the heater and have 
runaway heating costs. Speak to an expert if you are unsure.

Control Units

Thought it might seem as costly to have multiple thermostats installed 
per home. It will save energy and money in the long term. 

Carbon Neutral

Combining our heaters with solar panels or renewable energy sources 
could reduce your energy bills and carbon footprint further. 

Installer Name:

Company Name:

Company Address:

Installation Date:

Equipment Installed:

Electrician Signature:

Customer Signature:

Date:

Summary of Contents for Infrared Heater












Reviews: