Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
Modul-ART (EN) June 2018
10
Assembly
Placing of the chimney connection
Make sure to have an airtight connection.
Connection combustion air intake
Two specific cases may appear:
1
No possibility or necessity of outside air intake:
Remove the metal sheet plug on the front of the air box, which will permit to take the
combustion air in the room. Leave also open the air inlet on the back.
2
Connect the outside air inlet to the back of the nozzle or to the bottom (remove the lid
and plug the back entrance). In this case, keep the front panel of the air box.
CAUTION: We could not be held responsible for an improper installation. These
must be very neat and made according to standards. Complementary products
used for the installation must be conform to local regulations.
