Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
LOFT (EN) September 2019
17
Twice a year, clean the hinge of the door, coat with a releasing oil in order to prevent
moisture penetrating and from blocking the axis of this one.
Cleaning the fan (option)
It is necessary to supervise the state of cleanliness of the ventilators.
The accumulation of dust causes an unbalance of the turbine, which makes force the engine
which can burn or make noise.
Before any work, please disconnect the electricity supply.
The fan can be dusted if it is fouled. Do not apply pressure to the fan blades, at the risk of
bending them and thus creating an imbalance that will lead to noise and vibrations
These operations can be repeated during the year depending on the fouling.
Grease the axis.
Access to the fan from inside the appliance
.
Remove stainless steel channels and soil
vermiculite.
Remove the stainless steel strip that holds
the bottom of the vermiculites back and
remove it starting with the middle one.
Remove the stainless steel cover which hides
the screws from the fan access plate and
then dismount it.
Remove the baffle plate in front of the fan
outlet (2 nuts M6) and remove it.
Rotate the fan towards you.
Remove the fan from the unit.
