Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
LOFT (EN) September 2019
6
USER NOTICE
Starting a fire
1
Remove the excess ashes, place 2 +/- 1 kg logs in the center of the hearth, put on top
of the small wood and place a solid firelighter on the pile thus formed.
2
Then light the firelighter.
3
For a correct start of the appliance, the door must be opened slightly, then open the
external air inlet to the maximum for 10 to 15 minutes - the time necessary to reach a
sufficient temperature in the fireplace.
4
When the window is hot, please close the door. You can now position the control lever
to the centre to obtain reduced wood consumption with respect to the heat recovered.
Your fireplace is now in its optimum configuration: post-combustion and maximum
efficiency. You can regulate the air intake to the right according to the desired heat.
ATTENTION
Do not exceed the maximum loading authorized (see page 13).
-
The fireplace is designed to be used with the door closed, after starting the fire.
-
We recommend using solid firelighter blocks.
-
For a good performance do not remove completely the ashes of the stove.
Do not use inflammable liquid products.
