Lay the product flat on the table
Hang on the wall
Make sure antenna is installed before turn on the device.
When you get the device, it is off. Just press the button for 3 seconds and you can turn on the device. When you
turn on the device, there are 4 led on the top, all led will twinkle from left to right. If you turn off the device, press
the button for 3 seconds and all led will twinkle from right to left, after turn off the device, no data collecting and
uploading.
When turn on the device, normally the sensor will read data and upload every 10 mins, if you want to send data
immediately, you can just press the button for short time, less than 1 second, and sensor will read and upload
data. While press the button, 4 led will be green at the beginning, and then TX led on the device will be green
2. User Guide
2.1 Turn on/off the device
2.2 Data uploading by press the button
