12
EN
1
2
3
4
5
1.Cut-off Disc
Guard Cover
2.Grinding Wheel
Guard
3.Cut-off Disc
Guard
4.Screw
5.Bearing BOX
Rated capacity Φ4''
1
2
3
1.Cut-off Disc
Guard
2.Screw
3.Bearing BOX
Rated capacity Φ4-1/2''&Φ5''
1
2
3
1.Grinding wheel
guard
2.Screw
3.Bearing Box
●
Mounting the Auxiliary Handle
For all work with the tool,the auxiliary handle must be
mounted.
Screw the auxiliary handle on the right or left of the
tool head.
1.Auxiliary Handle
1
Warning
：
Only actuate the spindle lock when the spindle is not
moving.
1.Wrench
2.Spindle Lock
2
1
●
Operation
1. It should never be necessary to force the tool.
The weight of the tool applies adequate pressure.
Forcing and excessive pressure could cause
dangerous wheel breakage.
2. ALWAYS replace wheel if tool is dropped while
grinding.
3. NEVER bang or hit grinding disc or wheel onto
work.
4. Avoid bouncing and snagging the wheel, especially
when working corners, sharp edges etc. This can
cause loss of control and kickback.
5. NEVER use tool with wood cutting blades and
other sawblades. Such blades when used on a
grinder frequently kick and cause loss of control
leading to personal injury.
6. When the grinding wheel is worn to 75 mm, stop
using it. Continued use of a worn-out wheel may
result in wheel explosion and serious personal
injury.
After operation, always switch off the tool and wait
until the wheel has come to a complete stop before
putting the tool down.
Be sure to place one hand on the body and hold the
tool tightly. Turn on the power, and then apply the
grinding wheel to the workpiece. Generally, the edge
of the grinding wheel should maintain an angle of
15°-30 °with the surface of the workpiece.
During the break-in period with a new wheel, do not
work the grinder in the B direction, or it will cut into
the workpiece. Once the edge of the wheel has been
rounded off by use, the wheel may be worked in both
A and B directions.
●
Care and Maintenance
CAUTION:
Always be sure that the tool is switched
off and unplugged before attempting to perform
inspection or maintenance.
1.Do not use gasoline, benzene, thinner, alcohol or
