JHCTech FEBC-3158, User Manual

Page: 13 / 64

User’s Manual
6
2.1 Introduction
The following sections show the internal jumper settings and the external connectors and pin assignments for
applications.
2.2 Jumpers and connectors
The FEBC-3158 Embedded Box Computer consists of an JHC SBC (Single Board Computer) board that is
housed in an aluminum plate chassis. Your HDD and SDRAM, are all readily accessible by removing the
aluminum bottom cover. Any maintenance or hardware upgrades can be easily completed after removing the
bottom cover.
Warning:Do not remove any mechanical parts until you have verified that no power is flowing within the
Embedded Box Computer. Power must be switched off and the power cord must be unplugged.
Main board Internal Diagram-Front Side
Figure 2.1
Main board Internal Diagram-Back Side