JGR TLS, User Manual

Page: 41 / 54

TLS User Manual
TLS-UM-00001 Rev 001 37
Operation Complete Query
Syntax *OPC?
Function Places a “1” in the output queue of the source when all pending
operations have been completed. Because the “1” is not always
placed in the output queue immediately, the status byte register
should be polled and the MAV bit checked to determine if there is a
message available in the output queue.
Example *OPC?
Reset Command
Syntax *RST
Function Source is reset to the power-on condition.
Example *RST
Service Request Enable Command
Syntax
*SRE <space><numeric value> where 0

<numeric value>

63 and
128

<numberic value>

191.
Function Sets the bits in the service request enable register. The numeric
value is converted to a binary number. The bits of the register are
set to match the bit values of the binary number.
Example *SRE 154 sets the service request enable register bits to 10011010.
Service Request Enable Query
Syntax *SRE?
Function Returns the contents of the service request enable register as an
integer that, when converted to a binary number, represents the bit
values of the register.
Example *SRE? returns 154 if the service request enable register is set to
10011010.