6
(1)
Attach the spindle to a spool holder using the screw provided.
(2)
Attach the spool holder to the top of gantry with two thumb screws. Repeat the process
to install the other spool holder.
Note:
Threaded holes for thumb screws are located on the gantry at the positions shown.
Install the gantry onto the base
Mount brush box under each extruder nozzle. Secure with the provided thumb screws. Do not
install the brush boxes backwards, please refers to the label on the box. The side with brush
should face inside, to ensure the nozzles can be cleaned when moved to the home position.
Note:
The thumb screw might be replaced with screw in different production batches,
these are subject to change without prior notice.
Install brush box under each extruder nozzle
washer
M5*8 Screw