Product Introduction
【
4
】
Do not put your hands into the printing box during the printing, to avoid physical
injury.
【
5
】
Use the filaments recommended by the manufacturer so as to avoid clogs in the hot
end, or damages to the printer.
【
6
】
Do not use any other power cable, other than the one supplied. Use a grounded power
outlet.
【
7
】
Do not keep the nozzle or bed working continuously more than 96 hours at high
temperature, ensure 1~3 hours break.
【
8
】
Make sure the SD card is removed before turning on the printer.
【
9
】
Do not insert the Micro SD card frequently during the operation. Keep 10s powering
off before inserting new card.
【
10
】
When printer is not in use for extended periods of time, power off the printer and
disconnect the adapter from the outlets.
【
11
】
To protect against electrical shock, do not put the printer body, cord, or electrical
plug in liquid. If the printer falls into liquid, do not touch it. Instead, unplug the
printer from power outlet, then remove it immediately. Do not reach into the liquid
without unplugging the printer first.
【
12
】
It is highly recommended to keep the package material for further movement and
storage.
Model: Artist-D
Layer thickness
：
0.05~0.3mm
Printing speeed
：
10~150mm/s
(recommend 30~60mm/s
）
Nozzle replacement: One-button ejectable
Nozzle diameter
：
0.4mm
Hot bed temperature: Room temperature~90
℃
Supported materials: PLA/ABS/TPU/PVA, etc.
Filament diameter: 1.75±0.05mm
Language: English
Operating environment: Temperature 5
℃
~40
℃
Humidity 20~50%
2