JG special products GmbH
Seite | 7
3.1 Removing CIS guide plates
After cleaning the CIS-sensor you can put it carefully aside as to the protective glass lies
up.
Remove the 4 screws.
Please be careful at this action.
The ink tubes are not to be squashed or cutted.
Afterwards remove carefully backwards the Plastic frame from the printer.
The Plastic frame is to be cleaned with the cloth and the label remover until there are no
more labels and adhesive rests.
4. Select cleaning programs
By wiping the print head, the colours in the print head are mixed. Therefore you have to
start manually the cleaning procedure of the printer.
Act as follows:
Remove
