JF FCT 1460, Directions For Use Manual, Page: 81 / 114

6. WORKING IN THE FIELD
PIGB-206X-02 FCT1460 0614
- 81 -
Fig. 6-10 2) The chopper now works semi-offset as the tractor drives with one set of wheels
between the swaths. This technique results in a straight drive line and is suitable
for unloading to both sides. The parallel driving tractor can get closer to the
chopper and it is easier to control the loading of the trailer.
Fig. 6-11 3) Here the chopper works in-line as the tractor drives over the swath. This
technique is of course very suitable for picking up single swaths as you avoid
driving on the crop. The technique is still suitable for side loading to both sides
and brings the tractors close to each other.
CAUTION: The PTO shaft should work with a deviation of maximum 20

.
For sharp turns to the right it is therefore recommended that the
drawbar is moved to transport position or a position
corresponding to working in-line (see Fig. 6-11.)
Fig. 6-10
Fig. 6-11