JF FCT 1460, Directions For Use Manual, Page: 7 / 114

1. INTRODUCTION
PIGB-206X-02 FCT1460 0614
- 7 -
1. INTRODUCTION
INTENDED USE
The precision chop forage harvester FCT 1460 is solely constructed and
manufactured for the usual work in agriculture, i.e.: Usual work in fields where
you want to cut/gather and chop green crops such as maize, grass or whole crop
which are to be used for silage production intended for coarse fodder for cattle.
The machine should only be connected to a tractor which corresponds with the
specifications of the product and is legal to use.
Any use beyond this is outside the intended use. Kongskilde Industries A/S is
not responsible for any damage or injury resulting from such use; the user
bears that risk.
It is assumed that the work is performed under reasonable conditions, i.e. that the
fields are cultivated normally and to a reasonable extent kept clear of foreign matter
and debris.
Intended use also means that the instructions given by Kongskilde Industries A/S in
the instruction manual and the spare parts book are observed and that thorough
agricultural knowledge and technically correct use is a matter of course.
The precision chop forage harvester FCT 1460 should only be used, maintained
and repaired by persons who, through relevant instructions and after reading
the instruction manual, are familiar with the machine and, in particular, are
informed of possible dangers.
In the following there are a number of general and special safety instructions which
must be observed altogether.
If any changes are made on the machine and its construction without permission
from Kongskilde Industries A/S, Kongskilde Industries A/S cannot be held
responsible for any damage or personal injury resulting from this.