JF FCT 1460, Directions For Use Manual, Page: 35 / 114

3. MOUNTING OF EQUIPMENT
PIGB-206X-02 FCT1460 0614
- 35 -
Fig. 3-4 The trailer is disconnected as follows: If the locking pin D is placed so that it locks the
hitch hook A , see figure 3-4, the locking pin D is removed and placed in the holder on
the hydraulic hitch B . Then the hitch hook A is lowered by activating the cylinder C.
When the hitch hook A has been lowered completely, the trailer is disconnected. Also
remember to disconnect plugs for lighting and hoses for tipping and brakes, if these
were mounted.
PICK-UP
Connection is preferably carried out on firm and even ground.
The base machine is connected to the tractor according to section 2 “CONNECTION
TO TRACTOR”.
Fig. 3-5 Wheel the pick-up on the rollers to the machine so that the catch A is engaged.
Mount the 2 pins in order to fix the pick-up to the base machine.
Attach the relief device to the pick-up at
B .
Fig. 3-5
P
R
1
2
-0
2
1
2
A
B
Fig. 3-4
P
R
1
2
-1
7
4
8
A
B
C
D
E