27
-
MAC Filtering
The MAC filtering allows only selected devices to access your mobile hotspot Wi-Fi network.
By default, MAC filtering is turned
OFF
.
To enable MAC Filtering,
1. Select
ON
.
2. Press
Add
to add a line to enter permitted device name and MAC address, then click
OK.
When entering MAC addresses, use “:” as the separators (for example,
c2:b5:d7:27:fb:9b).
To add more, press
Add
to add another line.
3. When completed adding devices, press
Save Changes
.
NOTE
:
Once MAC filtering is set up, only listed device can access your mobile hotspot Wi-Fi
network. The MAC filtering has no effect on devices connected via USB connection or Ethernet
connection.
Summary of Contents for RG1100
