background image

 
 
                                                                                                                                                                                                                                                                                                                                                 

 

 

 

27

 

3-6 Advanced Chiset Features                                             

 

The Advanced Chipset Features Setup option is used to change the values of the chipset 
registers.    These registers control most of the system options in the computer. 
 

CMOS Setup Utility 

 Copyright(C) 1984-2003 Award Software 

Advanced Chipset Features 

Item Help 

  > DRAM Timing Settings        Press Enter 

  > AGP Timing Settings         Press Enter 

  > PCI Timing Settings         Press Enter 

    System BIOS Cacheable       Disabled 

    Video RAM Cacheable         Disabled 

    Memory Hole                 Disabled 

 

 

 

  Menu Level > 

↑↓→←

 Move Enter:/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values    F6:Optimized Defaults   F7:Standard Defaults 

 
DRAM Timing Settings 

Please refer to section 3-6-1 

AGP Timing Settings 

Please refer to section 3-6-2 

PCI Timing Settings 

Please refer to section 3-6-3 

System BIOS Cacheable 

Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in 
better system performance.    However, if any program writes to this memory area, a system 
error may result.    The settings are: Enabled and Disabled. 

Video RAM Cacheable 

Select Enabled allows caching of the video BIOS, resulting in better system performance.  
However, if any program writes to this memory area, a system error may result. The settings 
are: Enabled and Disabled. 

Memory Hole 

You can reserve this area of system memory for ISA adapter ROM.  When this area is 
reserved, it cannot be cached.    The user information of peripherals that need to use this area 
of system memory usually discusses their memory requirements. The settings are: Enabled 
and Disabled. 

Summary of Contents for V500DA

























































Reviews: