6
Chapter 2
Hardware installation
2-1 Pre-Hardware installation
Before starting to use the computer with the motherboard installing the components on it,
please make sure complete the following steps:
1.
To verify the settings of your motherboard
2.
To install the CPU
3.
To install the system memory
4.
To install the expansion cards
5.
To connect with ribbon cables, panel wires, and power supply
6.
To setup BIOS
7.
To install software driver & utility
2-2 To verify the jumper settings of the motherboard
(1) CPU Front Side Bus Frequency Setting (2x2-pin) : JP3, JP4
JP4 JP3
CPU
CLK
OFF ON 100MHz
OFF OFF 133MHz
(Default)
ON OFF 166MHz
ON ON 200MHz
(No
Support)
CPU Front Side Bus Frequency Setting
100MHz
JP3
1
2
JP4
166MHz
200MHz
133MHz
(Default)
JP3
1
2
JP4
JP3
1
2
JP4
JP3
1 2
JP4
(2) CPU Ratio Select (2x5-pin) : JP7
Ratio
1 2 3 4 5 Ratio
1 2 3 4 5
AUTO OFF
OFF OFF OFF
OFF
9.0x
ON ON ON OFF OFF
5.0x ON ON ON OFF
ON
9.5x
ON OFF ON OFF OFF
5.5x ON OFF ON OFF
ON
10.0x
ON ON OFF OFF OFF
6.0x ON ON OFF OFF
ON
10.5x
ON OFF OFF OFF OFF
6.5x ON OFF OFF OFF
ON
11.0x
ON ON ON ON ON
7.0X ON ON ON ON
OFF
11.5x
ON OFF ON ON ON
7.5x ON OFF ON ON
OFF
12.0x
ON ON OFF ON ON
8.0x ON ON OFF ON
OFF
12.5x
ON OFF OFF ON ON
8.5x
ON
OFF
OFF
ON
OFF
