5
2-2
Memory Module Installation
This motherboard provides two 240-pin DDR III DUAL INLINE MEMORY MODULES
(DIMM) socket for DDR III memory expansion available to maximum memory volume
of 16 GB DDRIII SDRAM.
Valid Memory Configurations
Bank 240-Pin
DIMM
PCS Maximum
Capacity
DIMM1 DDRIII
800/1066/1333/1600
X1
8GB
DIMM2 DDRIII
800/1066/1333/1600
X1
8GB
Total
System Memory (Max 8GB)
2
16GB
Recommend DIMM Module Combination
：
1.
One DDRIII Memory Module ----Plug in DIMMM1.
2.
Two DDRIII Memory Modules---Plug in DIMM1 & DIMM2 for Dual channel function
Dual channel Limited!
1. Memory modules plugged in the same color DIMM must be of the same type, same
size, and same frequency for dual channel function.
2. Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1
& DIMM2.
Install DDRIII modules to your motherboard is not difficult, you can refer to figure
below to see how to install DDRIII SDRAM module.
DI
MM2
(B
AN
K2
+B
AN
K3
)
DI
M
M
1 (
BAN
K0
+B
AN
K1
)
DIMM1 & DIMM2: Dual Channel
NOTICE!
When you install DIMM module fully into the DIMM socket the eject
tab should be locked into the DIMM module very firmly and fit into its
indention on both sides.
Installation Tips
：
Open the two plastic clips of memory slots then push down the module
vertically into the slot. See to it that the hole of the module fit into the notch of
the slot;
The two plastic clips will automatically close if the memory module is fitted in a
proper way.
