13
3-4 Jumper Setting
(1) JP1 (3-pin): KB/MS Power on Function Select
Keyboard /Mouse Power On Function Setting
2-3 Closed: KB/MS Power ON Enabled
JP1
JP1
1-2 Closed: KB/MS Power ON Disable (Default
)
(2) JBAT1 (3-pin): CMOS RAM Clear
A battery must be used to retain the motherboard configuration in CMOS RAM.
Note: When should clear CMOS
3. Troubleshooting
4. Forget
password
5. After over clocking system boot fail
WARNNING!
Please remove or turn off the power supply before CMOS clear.
Following these steps to clear CMOS:
1. Turn off the system and unplug the AC power
2. Remove ATX power cable from ATX power connector
3. Locate JBAT and short pins 2-3 for a few seconds
4. Return JBAT to its normal setting by shorting pins 1-2
5. Connect ATX power cable back to ATX power connector
CMOS RAM Clear Setting
2-3 Closed clear Cmos
JBAT1
JBAT1
1-2 Closed Normal
