34
DVMT Total Gfx Mem
Use this item to select DVMT5.0 Total Graphic Memory size used by the Internal
Graphics Device.
The optional settings: [128M]; [256M]; [MAX].
►
PEG Port Configuration
Press [Enter] to make further settings for PEG port options.
PEG Port Configuration
PCIE2 Slot
Enable Root Port
Use this item to enable or disable the Root Port. Root Port will Always Enable if
set x8 Bifurcation.
The optional settings: [Disabled]; [Enabled].
Max Link Speed
Use this item to configure PEG 0:1:0 Max Speed.
The optional settings: [Auto]; [Gen1]; [Gen2]; [Gen3].
PCIE4 Slot (Bifurcation)
Enable Root Port
Use this item to enable or disable the Root Port
The optional settings: [Disabled]; [Enabled].
Max Link Speed
Use this item to configure PEG 0:1:1 Max Speed.
The optional settings: [Auto]; [Gen1]; [Gen2]; [Gen3].
Detect Non-Compliance Device
This item is for user to detect Non-Compliance PCI Express Device in PEG.
The optional settings: [Disabled]; [Enabled].
►
PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
PCH-IO Configuration
HD Audio
Use this item to control Detection of the HD-Audio device.
The optional settings: [Disabled]; [Enabled].
[
Disabled
]: HDA will be unconditionally disabled.
[
Enabled
]: HAD will be unconditionally enabled.
Onboard Lan1 Controller
Use this item to enable or disable corresponding onboard NIC device or controller.
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
Wake on LAN Enable
Use this item to enable or disable integrated LAN to wake the system.
The optional settings: [Enabled]; [Disabled].
Onboard Lan2 / Lan3 / Lan4 Controller
Use this item to control the PCI Express Root Port.
The optional settings: [Disabled]; [Enabled].
System State After Power Failure
Use this item to specify what state to go to when power is re-applied after a power
failure (G3 state).
