25
*
Note
:
This function is supported when
‘
ERP Support
’ is set as [Disabled]
.
USB S3/S4 Wake-up
Use this item to enable or disable USB Power after System Shutdown.
The optional settings: [Disabled]; [Enabled].
*
Note
:
This function is supported when
‘
ERP Support
’ is set as [Disabled].
USB S5 Power
Use this item to USB Power after system shutdown support only disable ERP
Function.
The optional settings: [Disabled]; [Enabled].
Super IO Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
ERP Support
Use this item to select Energy-Related Products function. This item should be set
as [Disabled] if you wish to have all active wake-up functions.
The optional settings: [Disabled]; [Auto].
►
Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port 1 Configuration
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for Super IO Device.
The optional settings: [IO=3F8h; IRQ=4;]; [IO=3F8h; IRQ=3,4,5,7,10,11;];
[IO=2F8h; IRQ=3,4,5,7,10,11;]; [IO=3E8h; IRQ=3,4,5,7,10,11;]; [IO=2E8h;
IRQ=3,4,5,7,10,11;].
Transmission Mode Select
The optional settings: [RS422]; [RS232]; [RS485].
*
Note:
Q4700 chipset supports RS232/RS422/RS485, W4800 supports RS232
only.
Mode Speed Select
Use this item to select RS232/RS422/RS485 Speed.
The
optional
settings:
[RS232/RS422/RS485=250Kbps];
[RS232=1Mbps,
RS422/RS485=10Mbps].
►
Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
Serial Port 2 Configuration
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
