28
Use this item to set CPUFAN/SYSFAN full-speed duty. Fan will run at full speed
when above this pre-set duty.
CPUFAN1 / SYSFAN1 / SYSFAN2 Idle-Speed Temperature
Use this item to set CPUFAN /SYSFAN idle speed temperature. Fan will run at idle
speed when below this pre-set temperature.
CPUFAN1 / SYSFAN1 / SYSFAN2 Idle-Speed Duty
Use this item to set CPUFAN/SYSFAN idle speed duty. Fan will run at idle speed
when below this pre-set duty.
Second Super IO Configuration
Press [Enter] to view current hardware health status, make further settings in
‘
SmartFAN Configuration
’ and set value in ‘
Shutdown Temperature
’.
►
SmartFAN Configuration
Press [Enter] to make settings for ‘
SmartFAN Configuration
’:
SmartFAN Configuration
SYSFAN3/4/5/6 Smart Mode
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
SYSFAN3/4/5/6 Full-Speed Temperature
Use this item to set SYSFAN full speed temperature. Fan will run at full speed
when above this pre-set temperature.
SYSFAN3/4/5/6 Full-Speed Duty
Use this item to set SYSFAN full-speed duty. Fan will run at full speed when above
this pre-set duty.
SYSFAN3/4/5/6 Idle-Speed Temperature
Use this item to set SYSFAN idle speed temperature. Fan will run at idle speed
when below this pre-set temperature.
SYSFAN3/4/5/6 Idle-Speed Duty
Use this item to set /SYSFAN idle speed duty. Fan will run at idle speed when
below this pre-set duty.
Serial Port Console Redirection
COM1
Console Redirection
Use this item to enable or disable COM1 Console Redirection.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.
Press [Enter] to make settings for the following sub-items.
COM1
Console Redirection Settings
Terminal Type
The optional settings: [VT100]; [VT100+]; [VT-UTF8]; [ANSI].
Emulation:
[ANSI]:
Extended ASCII char set;
[VT100]:
ASCII char set;
