III.
To Install M.2 E-Key (2230) PCIe Wi-Fi Card
1.
Sort out the USB cable to make room and
locate the M.2 E-Key (2230) slot on the board.
Prepare compatible M.2 E-Key (2230) card.
2.
Remove the marked screw and screw bolt, and
use screw bolt to lock compatible card to the slot
in later installation.
3.
Insert the gold-finger side of the compatible
card into the slot and press down. See to it that
the golden-finger side should be fully plugged
into the slot.
4.
Secure the card to the board by tightening up
the screw bolt to the marked spot.
5.
Locate the reserved antenna holes on the rear
panel. Remove the dust-proof plugs on the
marked spots from the panel to install the
antenna.
6.
Remove the two marked screws from the
HDMI cable and remove the HDMI connector
from the panel.
