33
DIMM profile
Use this item to select DIMM timing profile that should be used.
The optional settings are: [Default DIMM profile]; [Custom Profile].
When set as [Custom Profile], the sub-item
‘Custom Profile Control’
will appear
for user to manually set memory timing configuration.
Memory Frequency Limiter
Use this item to set maximum memory frequency selection in Mhz. This item will not
show on the screen when
‘DIMM Profile’
is set as: [Custom Profile].
The optional settings are [1066]; [1333]; [1600].
tCL
The Cas Latency Range is from [4] to [18].
tRCD
The Row to Col Delay Range is from [1] to [38].
tRP
The Ras Precharge Range is from [1] to [38].
tRAS
The Ras Active Time Range is from [1] to [586].
tWR
The Min Write Recovery Time Range is from [1] to [38].
tRFC
The Min Refresh Recovery Delay Time Range is from [1] to [9363].
tRRD
The Min Row Active to Row Active Delay Time Range is from [1] to [38].
tWTR
The Min Internal Write to Read Command Delay Time Range is from [1] to [38].
tRTP
The Min Internal Read to Precharge Command Delay Time Range is from [1] to
[38].
tRC
The Min Active to Active/Refresh Delay Time (tRCmin) Range is from [1] to [586].
tFAW
The Min Four Active Window Delay Time Range is from [1] to [586].
tCWL
Use this item to setup Minimum CAS Write Latency Time (tCWLmin).
