20
The optional settings are: [Disabled]; [Enabled].
Wake-Up by PCIE/Lan
Use this item to disable or enable PCIE Device PME in S1/S3/S4/S5.
The optional settings are: [Disabled]; [Enabled].
Wake-Up by PS/2 keyboard
Use this item to disable or enable PS/2 keyboard Wake-up from S3/S4/S5.
The optional settings are: [Disabled]; [Enabled].
Wake-Up by PS/2 mouse
Use this item to disable or enable PS/2 mouse Wake-up from S3/S4/S5.
The optional settings are: [Disabled]; [Enabled].
PWRON After PWR-Fail
Use this item to select the power supply status.
The optional settings are: [Former-Sts]; [Always On]; [Always Off].
[Former-Sts]: Remain the status when power is restored.
[Always On]:
Device will automatically start up when power is restored.
[Always Off]: Device will remain powered off even when power is restored.
USB2_PS2 StandBy Power Support`
Use this item to disable or enable USB2_PS2 StandBy Power.
The optional settings are: [Disabled]; [Enabled].
RTC WakeUp Settings
Press [Enter] to make settings for the following sub-item:
Wake System with Fixed Time
Use this item to enable or disable system wake-up on alarm event.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the Hour/Minute/Second specified.
Wake System with Dynamic Time
Use this item to enable or disable system wake-up on alarm event.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the (Current time) + (Increased
minute(s)).
SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Controller(s)
