27
The optional settings are: [32M]; [64M]; [96M]; [128M]; [160M]; [192M]; [224M];
[256M]; [288M]; [320M]; [352M]; [384M]; [416M]; [448M]; [480M]; [512M]; [1024M].
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128M]; [256M]; [MAX].
RC6 (Render Standby)
The optional settings are: [Disabled]; [Enabled].
DMI Link ASPM Control
Use this item to enable or disable the control of Active State Power Management on
SA side of the DMI Link.
The optional settings are: [Disabled]; [L0s]; [L1]; [L0sL1].
DMI Gen 2
Use this item to enable or disable DMI Gen2/nAuto means Disabled for IVB A0
MB/DT and IVB B0 MB, Enabled for other CPUs.
The optional settings are: [Auto]; [Enabled]; [Disabled].
Enable PEG
The optional settings are: [Disabled]; [Enabled]; [Auto].
PEG – Gen X
Use this item to configure PEG B0:D1:F0 Gen1-Gen3.
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
Detect Non-Compliance Device
The optional settings are: [Disabled]; [Enabled].
PEG – ASPM
Use this item to select ASPM support for the PEG Device. This has no effect if PEG
is not the currently active device.
The optional settings are: [Disabled]; [Auto]; [ASPM L0s]; [ASPM L1]; [ASPM
L0sL1].
Select [ASPM L0s] and [ASPM L0sL1] you can set value for the following sub-item:
ASPM L0s
Use this item to enable PCIe ASPM L0s.
The optional settings are: [Root Port Only]; [Endpoint Port Only]; [Both Root
and Endpoint Ports].
Primary IGFX Boot Display
