14
2.
Turn over the HDD tray and fix 2.5’’ HDD upon HDD tray by tightening 4* screws marked in
corresponding spots.
3.
Plug SATA power connector and SATA port connector into connectors onboard.
4.
Adjust the installed tray as showed above. Fix HDD tray into the system by tightening up 4
screws marked. (refer to I-6)
Notice: When all necessary installations are finished, please make sure that all cables
unplugged before installations are connected to their original locations before restoring the
back cover to the chassis and screws on the front panel/back panel/top cover locked to its
original locations (Refer to Part I). See to it that the cables inside are not blocked or pressed.
Summary of Contents for FDF13 Series
Page 2: ...2 I O Outlets...
