2
1-2 Specification
Spec Description
Design
∗
MICRO-ATX form factor 4 layers PCB size: 24.4x21.0cm
Chipset
∗
ATI RADEON 9000PRO IGP (RC350) North Bridge Chipset
∗
ATI IXP 300 South Bridge
CPU Socket
∗
Support Intel Pentium 4 478-Pin package utilizes Flip-Chip Pin
Grid Array (FC-PGA2) package processor
∗
Support Northwood/Hyper-Threading / Prescott CPU
∗
Support 1.5G
∼
3.4G 478 Pin Pentium 4 processor
∗
Reserves support for future Intel Pentium 4 processors
Memory Socket
∗
184-pin DDR module socket x2, Support 2 pcs DDR266
/DDR333/DDR400 DDR Modules Expandable to 2.0GB
Expansion Slot &
Headers
∗
AGP slot x1 support AGP 2.0 & 3.0 for 4X/8X mode
∗
32-bit PCI slot x3
Integrate IDE
∗
Two PCI IDE controllers support PCI Bus Mastering, ATA
PIO/DMA and the ULTRA DMA 33/66/100/133 functions that
deliver the data transfer rate up to 133 MB/s
Serial ATA RAID
∗
ATI IXP 300 integrated Serial ATA controller supports two
serial ATA IDE ports
∗
Two Serial ATA ports provide 150 MB/sec data transfer rate
for two Serial ATA Devices and offer RAID 0, 1 functions
On board LAN
∗
RealTek RT8100C LAN controller chip support 10/100Mbps
full duplex, half duplex operation
∗
Support Boot On LAN function
Integrate VGA
∗
VGA memory share 32~128MB from system memory
∗
24-bit true-color RAMDAC up to 250MHz pixel rate
∗
Resolution up to 2048x1536 @ 32bpp
TV-Out
∗
With optional cable support S-Video/ RCA TV-out signal
(
users only can use either CRT or TV-Out at the same time
)
Audio
∗
AC’97 Digital Audio controller integrated
∗
AC’97 Audio CODEC on board
∗
Audio driver and utility included
∗
Support 6 channel Speaker for 3D surround effect
∗
With optional cable support SPDIF-In/Out function
BIOS
∗
Award 4MBit Flash ROM
Multi I/O
∗
PS/2 keyboard and PS/2 mouse connectors
∗
Floppy disk drive connector x1
∗
Parallel port x1, Serial port x2
∗
USB2.0 connector x4, headers x4 (connecting cable option)
∗
Audio connector (Line-in, Line-out, MIC)