background image

 
 
                                                                                                                                                                                                                                                                                                                                                           

 

 

 

28

 

3-7-1   OnChip IDE Device 

CMOS Setup Utility – Copyright(C) 1984-2004 Award Software 

OnChip IDE Device 

Item Help 

OnChip IDE Channel0          

Enabled 

  OnChip IDE Channel1             Enabled 
  Primary Master   PIO            Auto 
  Primary Slave    PIO            Auto 
  Secondary Master PIO            Auto 
  Secondary Slave  PIO            Auto 
  Primary Master   UDMA           Auto 
  Primary Slave    UDMA           Auto 
  Secondary Master UDMA          Auto 
  Secondary Slave  UDMA           Auto 
  IDE Prefetch Mode               Disabled 
  IDE HDD Block Mode              Enabled 
  Delay For HDD (Secs)             0 
 
 
 
 

  Menu Level >> 

 

↑↓→←

 Move Enter:/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values   F6:Optimized Defaults    F7:Standard Defaults 

OnChip IDE Channal0/Channel1 

The integrated peripheral controller contains an IDE interface with support for two IDE channels.   
Select Enabled to activate each channel separately.    The settings are: Enabled and Disabled. 

Primary/Secondary Master/Slave PIO 

The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the 
four IDE devices that the onboard IDE interface supports.  Modes 0 through 4 provide 
successively increased performance. In Auto mode, the system automatically determines the best 
mode for each device.    The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4. 

Primary/Secondary Master/Slave UDMA 

Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the 
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus 
master driver).   If your hard drive and your system software both support Ultra DMA/33 and 
Ultra DMA/66, select Auto to enable BIOS support.    The settings are: Auto, Disabled. 

IDE HDD Block Mode 

Block mode is also called block transfer, multiple commands, or multiple sector read/write.    If 
your IDE hard drive supports block mode (most new drives do), select Enabled for automatic 
detection of the optimal number of block read/writes per sector the drive can support.  The 
settings are: Enabled, Disabled. 

 

Summary of Contents for A353DMSR1A



























































Reviews: