JETWAY 754TURBOR208 User Manual Download Page 52

Page: 52 / 60

NOTE:

Functions of each version will differ from each other, and will be based on the function

descriptions of each version.

System Requirements

◇

First OS must be Windows 98 SE/ME/2000/XP

◇

Support Only Windows OS (No Linux)

◇

Windows server OS and Windows NT not supported

◇

Minimum of Intel 486 or above, 16MB of memory or above

◇

Minimum of 500MB free/usable space or above

◇

Support for SCSI & SATA Hard disk

Pro Magic Plus only supports SCSI hard disk with Windows 2000 or OS above

Notice Before Installation

1. Before install Pro Magic Plus, turn off all anti-virus software. (Include BIOS anti-virus

function)

2. Pro Magic Plus does not support multiple PRI partitions. If you have multiple PRI

partitions, please repartition your HD before installation.

If your HDD is not fully partitioned (with un-partitioned/unused space at end of HDD),

please repartition the HDD before install Pro Magic Plus.

Summary of Contents for 754TURBOR208





























































Search results

Summary of Contents for 754TURBOR208

Reviews:

Related manuals for 754TURBOR208

Brands by name

Popular brands

JETWAY 754TURBOR208, User Manual

Search results

Summary of Contents for 754TURBOR208

Reviews:

Related manuals for 754TURBOR208

Brands by name

Popular brands