32
3-8-1 Wake up Events
Phoenix – AwardBIOS CMOS Setup Utility
Wake Up Events
Item Help
VGA OFF
LPT & COM LPT/COM
HDD & FDD ON
PCI Master OFF
Wake-Up on Ring Disabled
Wake-Up on PCI PME Disabled
PS2 KB Wake up Selection Hot Key
Wake-Up on Hot Key (PS2 KB) Disabled
Wake-Up on USB Device Disabled
Wake-Up on RTC Alarm Disabled
Date of Month Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
> IRQs Activities Press Enter
Menu Level >>
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Wake Up On Ring/PME
During Disabled, the system will ignore any incoming call from the modem. During Enabled, the
system will boot up if there’s an incoming call from the modem.
Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you cannot
use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note:
If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
3-9 Miscellaneous Control
This section is for setting CPU Frequency/Voltage Control.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
Auto Detect PCI Clk Enabled
Spread Spectrum Disabled
Flash Port Write Protect Enabled
> IRQ Resources Press Enter
PCI/VGA Palette Snoop Disabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
