14
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
CPU Host/DRAM Clock Default
CPU Clock Ratio Jumpless x 3.0
Menu Level >
↑↓→←
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
NOTE! The BIOS allows you select Bus Frequency from 66MHz to 133MHz,
the wrong setting will cause system can not starting, when it happen you
have to clear CMOS and adjust correct setting for your CPU. Again we
don’t suggest user running over clock.
2-4 Install Memory
This motherboard provides two 168-pin DUAL INLINE MEMORY MODULES
(DIMM) sites for memory expansion available from minimum memory size of
16MB to maximum memory size of 1GB SDRAM.
Valid Memory Configurations
Bank
168-Pin DIMM
Total Memory
Bank 0, 1
(DIMM1)
SDRAM 32, 64, 128, 256, 512MB
X 1
16MB
∼
512MB
Bank 2, 3
(DIMM2)
SDRAM 32, 64, 128, 256, 512MB
X 1
16MB
∼
512MB
Total
System Memory (Max. 1GB)
16MB
∼
1GB
Generally, installing SDRAM modules to your motherboard is very easy, you can
refer to figure 2-4 to see what a 168-Pin PC100 & PC133 SDRAM module looks
like.
CPU Host/DRAM Clock
Default [ ]
66/66MHz ..... [ ]
66/100MHz ..... [ ]
75/75MHz ..... [ ]
83/83MHz ..... [ ]
95/95MHz ..... [ ]
96/96MHz ..... [ ]
97/97MHz ..... [ ]
100/100MHz ..... [ ]
100/133MHz ..... [ ]
112/112MHz ..... [ ]
133/100MHz ..... [ ]
133/133MHz ..... [ ]
↑↓
:Move ENTER:Accept ESC:Abort
