37
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To
operate the onboard parallel port in the EPP modes simultaneously, choose “EPP.” By
choosing “ECP”, the onboard parallel port will operate in ECP mode only. Choosing
“ECP+EPP” will allow the onboard parallel port to support both the ECP and EPP
modes simultaneously. The ECP mode has to use the DMA channel, so choose the
onboard parallel port with the ECP feature. After selecting it, the following message
will appear: “ECP Mode Use DMA” at this time, the user can choose between DMA
channels 3 to 1. The onboard parallel port is EPP Spec. compliant, so after the user
chooses the onboard parallel port with the EPP function, the following message will be
displayed on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec. or EPP
1.9 spec. can be chosen.
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Power Management Setup
Item Help
ACPI Function Enabled
Video Off Option Susp, Stby -> off
Video Off Method V/H SYNC+Blank
Switch Function Break/Wake
MODEM Use IRQ 3
Hot key Function As Disabled
HDD Off After Disabled
Power Button Function Instant-Off
> PM Wake Up Events Press Enter
Menu Level >
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend
→
off, All Modes
→
Off, and Always On.
