41
When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
DMA Resources
This sub menu can let you control the DMA resource.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
PC Health Status
Item Help
Show PC Health in Post Enabled
Shutdown Temperature Disabled
Vcore 1.65V
Vcc 1.8V 1.85V
VCC 3.3V 3.3V
VCC 5V 4.97V
+12V 11.90V
-12V (-)12.03V
-5V (-) 5.10V
5VSB 4.97V
Vbat 3.29V
System Temperature 25
°
C
CPU Temperature 51
°
C
FAN1 Speed 5843 RPM
FAN2 Speed 6132 RPM
FAN3 Speed 5720 RPM
Menu Level >
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
CPU Temperature
During Enabled, this will warn the user when the CPU temperature reaches a certain
temperature.
Current System Temp/Current CPU Temperature/Current FAN1, FAN2, FAN3
Speed/ Vcore/VTT/3.3V/+5V/+12V/-12V/ -5V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
Shutdown Temperature
This option is for setting the Shutdown temperature level for the processor. When the
processor reaches the temperature you set, this will shutdown the system.
3-11 Miscellaneous Control
