14
SS
SS
According the specification when SDRAM clock is 133MHz only can support 2 pcs
Double Sided DIMMs
DS : Double Sided DIMM
SS : Single Sided DIMM
NOTE!
Make sure the total installed memory does not exceeds 512MB, otherwise
the system may hang during startup.
Generally, installing SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 168-Pin PC100 & PC133 SDRAM module looks like.
DI
M
M
2
(
B
ANK
2
+
B
A
N
K
3
)
DI
M
M
1
(
B
ANK
0
+
B
A
N
K
1
)
NOTE!
When you install DIMM module fully into the DIMM socket the eject
tab should be locked into the DIMM module very firmly and fit into
its indention on both sides.
WARNING!
For the SDRAM CLOCK is set at 133MHz, use only PC133-compliant
DIMMs. When this motherboard operate at 133Mhz, most system
will not even boot if non-compliant modules are used because of the
strict timing issues, if your DIMM are not PC133-compliant, set the
SDRAM clock to 100MHz to ensure system stability.
2-5 Expansion Cards
WARNING!
Turn off your power when adding or removing expansion cards or other
system components. Failure to do so may cause severe damage to both
your motherboard and expansion cards.
Figure 2-4
