11
This motherboard provides
two
168-pin DUAL INLINE MEMORY MODULES
(DIMM) sites for memory expansion available from minimum memory size over
32MB to maximum memory size of 1GB SDRAM.
Valid Memory Configurations
Total Memory
DIMM1
DIMM2
System Accept or Not
Min.
∼
Max.
DS/SS
Accept
32MB
∼
512MB
DS/SS
Accept
32MB
∼
512MB
DS/SS DS/SS
Accept
32MB
∼
1GB
DS : Double Sided DIMM SS : Single Sided DIMM
NOTE!
Make sure the total installed memory does not exceeds 1GB, otherwise the
system may hang during startup.
Generally, installing SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 168-Pin PC100 & PC133 SDRAM module looks like.
DIMM2 (BANK2+ BANK3)
DIMM1 (BANK0+ BANK1)
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab should be
locked into the DIMM module very firmly and fit into its indention on both sides.
WARNING!
If the SDRAM CLOCK is set at 133MHz, you must use only PC133-
compliant DIMMs. When this motherboard operate at 133Mhz, most
system will not even boot if non-compliant SDRAM modules are used
because of the strict timing issues, if your DIMM are not PC133-
compliant, set the SDRAM clock to 100MHz to ensure system’s
stability.
2-5 Expansion Cards
Figure 2-4
