9
Important Notice
Please read this before you start to install optical device.
To avoid possible damage to the 5.25” device revolving door cover of the MiniQ system case, it
is highly recommended that you remove the bezel/facial plate on the tray of optical device before
installation. Please refer to the following picture for detail.
1. push out the tray
2. remove facial plate on tray
3. complete
Optical devices and mechanical parts have their dimension tolerance. They might differ in size.
To make sure the optical device has fine contact with the EJECT button in the back of front
bezel of MiniQ system, the 5.25” device bay bracket has two kinds of screw hole for micro
adjustment of device fixing position:
1) Upper row of three screw holes are suitable for most of the market available CD-ROM / DVD-
ROM / DVD-RW (See picture 1). The third screw hole from front bezel is for micro adjustment of
position, if necessary
2) If position of these three screw holes cannot match your CD-ROM / DVD-ROM / DVD-RW
(such as SONY DVD-ROM Model: EDU-1621), you can opt to use the long oval hole beneath
the three screw holes for fine contact. (See picture 2)
Picture 1
Picture 2
