Jette JEFF, User Manual

Page: 17 / 103

For dismantle the canopy, press the two plastic push buttons (fig. 14), found inside
the plastic slot, and pull the roof upwards.
WARNING: Always fold the roof before you fold up the pram.
Safety belt:
To put the safety belt on close the two belt buckles (A and B) at the central piece (C).
To open the safety belt press the clips on the side at the same time and pull the
buckles apart (figure 15). To guarantee the maximum safety for you child adjust the
length of the belt to fit your child. The length of the belt should be adjusted so that
the belt fits tightly.
Removing the safety bar:
To attach the bow, put it in the two provided notches for the bow on the seat
(fig.16). To demount the bow, press the locking mechanism on the inner side of the
bow retainer and pull the bow out (fig.17).
To change the height of the bow, press both buttons on the outside (fig.18).
Folding:
Before you fold the stroller, always make sure that the stroller case isn’t mounted to
the framework and that the break has been operated.
For folding the stroller with attached seat part, always mind that this is only possible
when the piece for sitting is put on in a manner that the child faces the direction of
travel (fig. 19 & 20), otherwise there can be damage to the stroller.
For folding, then stand on the side of the slider and pull both locking levers towards
you (fig.21), at the same time push the sliding handle downwards.
Now the stroller can be folded.
When the stroller has been completely folded, the safety interlock locks automatically
(fig.1). Lastly, make sure that the stroller can’t open independently.
Usage your baby stroller with a carrycot:
Setting the carrycot :
To set the carrying bag up, first of all remove the cloth mattress (lying area). Now
slide the two spring clips to the outside until the clips snap into the notches and the
carrying bag is spanned (fig.22). Now you can put the cloth mattress back into the
carrying bag.
To fold the carrying bag, first of all remove the cloth mattress (lying area) and then
slide the two spring clips to the inside (fig23). Then you can put the cloth mattress
back into the carrying bag.
GB