15
If you want to increase the intensity from the level 6 to the level 7, touch and hold the “+”
button (12) for 2 second and then it is possible to increase the intensity by the held button.
g)
Types of applicators and their use
1) Flat and conic applicator
Flat and conic applicators are used only for cosmetic treatments (intensities 1-5) of
stretchmark, wrinkles and rejuvenation. The flat applicator is designed for the treatment of
bigger areas. This applicator moves on skin covered with a conductive indifferent gel and it
causes electrical stimulation of cells by DC current
–
Na/K channels are opened and cell
membranes are depolarized. The conic applicator has the same use, but it does not touch skin
–
it touches only the indifferent gel.
2) Golden applicator with precise tip
It is designed for face treatments and precise removals of skin perturbations or causing
fulguration micro-burnings of skin in the closeness of wrinkles that make the skin tightened
after they are healed.
The golden applicator with a precise tip that can be used on its own or with a distant glass
tube (see registered design no. 27650). When the distant glass tube is used, the constant
distance of 2 mm is maintained between the tip and patient’s skin. This applicator with a
distant tube is registered and protected by registered design no. 27650. Therefore, it is the first
device in the world that can target the flow of sparks into a very thin beam and keep the
distance of 2 mm from the skin at the same time.
