11
Do not bend the supply cable or any other equipment with force and do not place any heavy
or sharp objects on them (danger of fire or electric shock).
Do not plug more than one device into one power source (danger of fire).
Check the parameters of power source before plugging the device in.
If other than recommended power source is used, electric circuits can be damaged or there can
be a danger of a fire.
It is necessary to monitor the effect of plasma discharge on skin cells during the treatment. If
any unexpected effect appears, the tip must be taken off the skin immediately and treatment
must be stopped immediately.
Do not place the device at the place, where it could be unplugged from the power source by
chance.
Error Messages on the Screen:
TAPE
–
Grounding of patient
The device is equipped with a reliable safety system SCS (Safety Control
System), which is able to detect whether the patient is grounded.
Warning:
Patients must have the grounding electrode stick to their body during
the whole time of the treatment. If the patient is nt grounded, the display shows
the warning „TAPE“ and the generator the Plasma is disconnected
automatically.
TErr -
Two buttons pushed simultaneously. Error of the Operation, the message
“TErr”
appears.
SrvC - Hardware error
If a hardware error appears, the device switches off automatically and an error
message “SrvC”
appears. The device cannot be switched on anymore and it
must be sent into an authorized service.
Written consent, training of the staff:
Only trained doctors can use the device.
DANGER:
The trained staff must make sure that the patient does not suffer from any
of the contraindications before the treatment and he must make the patient sign the
informed consent. Training of the operators is provided either by the manufacturer or
authorized distributor. The trained staff receives a certificate entitling is holder to
work with Jett Plasma Lift Medical. The trained staff must make sure that in his
workplace untrained people can´t work with the device.
The trained staff must continuously follow the working protocols set by the
manufacturer and must avoid following safety dangers:
