13
Installation Suggestion
7
9
450
450
Ø 90
ca. 930
max.
300
max. 50
240
(300)
min 1000
will not be
delivered
protection tube
control panel
approx 5-10 cm
above waterlevel
gasket
pump
wall duct
up to 350
appro
x.
250
1
5
4
3
2
PUNTO
LARGO
8
6
14
13
12
8 9
11
10
1
2 3
4 5 6 7
Ø 48
450
ca. 769
appro
x.
1160
dimensions in cm
dimen-
sions
in cm
4.4 Winterization
If there is any danger of frost or freezing conditions then it is advisable to drain down the Largo or Punto jet assembly. To do this
close the
suction-sided ball valve
and remove the screw plug at the lower part of the pump housing.
After water has drained off, do not re-assemble the screw plug.
The pressure-sided ball valve can remain open.
4.5 Re-operation
Fill the pool up to its normal level. Replace the screw plug into the lower part of the pump housing. Before starting the pump,
rotate the pump manually several times
(Turn the ventilating fan clockwise by means of a screw driver) and re-open the ball
valve
5
SERVICE
Only operate the unit if it is in perfect condition. Take care to have it regularly checked and serviced. After
repair or when the unit is brought back into operation, ensure that it has not been tampered with.
The unit must only be serviced by authorized persons. Do not carry out any work which might have
impair the safety of the unit. Only buy original spares from your dealer or uwe.
