7
Safety Checklist
BEFORE EVERY RIDE, CONDUCT THESE IMPORTANT SAFETY CHECKS.
BRAKES
• MAKE SURE BRAKES WORK PROPERLY.
• CHECK THAT THE BRAKE PADS ARE NOT WORN, AND ARE ALIGNED AND CENTERED CORRECTLY.
• CHECK THAT THE HANDBRAKES ARE LUBRICATED AND ARE SECURED TO THE HANDLEBAR.
STEERING
• CHECK THAT THE HANDLEBAR AND STEM ARE ALIGNED WITH THE FORK AND ARE SECURELY TIGHTENED.
CRANKS AND PEDALS
• CHECK THAT THE PEDALS ARE SECURELY TIGHTENED TO THE CRANKS AND THAT THE CRANKS ARE TIGHTENED
TO THE AXLE.
WHEELS AND TIRES
• MAKE SURE THAT THE TIRES ARE INFLATED TO WITHIN THE MAXIMUM RECOMMENDED TIRE PRESSURE OF 43 PSI.
• CHECK TIRES AND WHEEL RIMS FOR EXCESSIVE WEAR OR ANY DAMAGE.
• CHECK THAT THE WHEEL SPOKES ARE NOT BROKEN AND THAT THE AXLE NUTS ARE TIGHT.
CHAIN
• MAKE SURE ALL BEARINGS ARE LUBRICATED AND RUN SMOOTHLY.
FRAME AND FORK
• CHECK THAT THE FRAME AND FORK ARE NOT DAMAGED OR BROKEN.
Summary of Contents for JLRX20-BLU
