background image

5

• Make sure your feet are always placed securely on the pedals.

• Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate certification, 

and any other equipment recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads, 

and elbow pads.

• Always give way to pedestrians.

• Be alert to things in front and far away from you.

• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.

• The product cannot be ridden by more than one person.

• When you ride the product along with other riders, always keep a safe distance to avoid a collision.

• When turning, be sure to maintain your balance.

• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.

• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or 

excessive application of the brake may result in injury or death.

• If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team.

• Replace worn or broken parts immediately.

• The area that the product is to be operated should be safe and suitable for safe operation.

• Check whether all safety labels are in place and understood before riding.

• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate 

all components of the unit before use.

• Use caution when changing the batteries. Do not change batteries near flammable materials. Remove batteries from the bike 

when not in use for long periods of time.

• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.

MODIFICATIONS

Do not attempt to disassemble, modify, repair, or replace the product or any components of the unit without instruction from 

the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.

ADDITIONAL OPERATION PRECAUTIONS

 Do not lift the product off the ground while it is on and the wheels are in motion. This can result in freely spinning wheels, 

which may cause injury to yourself or others nearby. 

• Do not jump on or off the product, and do not jump while using it. 

• Always keep your feet firmly planted on the pedals while in operation. 

• The Consumer Product Safety Commission advises that the riding of small wheel diameter bicycles at excessive speeds can

lead to instability and is not recommended.

• Always wear a properly fitted helmet when you ride your bicycle. Do not ride at night. Avoid riding in wet conditions.

Summary of Contents for JLRX20-BLU











































Reviews: