Bike Chain
The chain must maintain a slight sag to be able to switch be-
tween gears when shifting. It is important to make sure that the
chain is the proper length, or the cycling performance will be
affected negatively.
To determine the length of the chain,
adjust the Back Fender to the lowest
gear, the chain should sag 15mm or less
(as shown to the right). If the chain sags
more than 15mm, the chain is too long
and must be shortened by the supplier to
maintain the best cycling performance
for your electric bike.
Damping System
The Damping system helps keep the tire buffer in contact with
the ground when the electric bike is running on uneven road.
This helps you feel more comfortable during difficult conditions.
Damping hardness can be adjusted by
rotating the Damping Coefficient (as seen
on the left), according to road conditions
and personal preference. The Damping sys-
tem can be found on the Front Fork, please
check Page 3 to locate it on the electric
bike.
NOTE: Do not adjust damping while in motion. Be sure to test damping levels fully
to match your preferences.
To adjust the damping, rotate towards the
+
sign to increase
the damping hardness. Rotate towards the
-
sign to reduce the
damping hardness.
14
OPERATION AND ADJUSTMENT
