Disc Brake
To adjust the brake shoe block:
1. Loosen the position adjustment bolt.
2. Use the left and right knobs to adjust the distance of the shoe
block. The left knob increases the distance of the brake shoe
block, and the right knob decreases it. This adjusts the braking
abilities of the electric bike.
NOTE: Do not oil the surface of the Brake Disc, this may lead to serious braking
problems.
1. Stoke Adjusting Bolt
2. Position Adjusting Bolt
3. Rocker Arm
4. Permanent Seat
5. Brake Shoe Block
6. Shoe Block Adjusting Bolt
7. Permanent Seat of Brake Line
Brake Cable
•
The brake cable should be arranged in as straight a
line as possible. Please avoid any turns or curves in
the cable, as that will affect braking capabilities.
•
To avoid splitting of the cable, make sure that the tail
sleeve fully covers the line end.
•
Take the brake cable out regularly to oil it, this helps
avoid resistance from rust build-up.
•
The length of the brake cable is meant to allow the
cable to remain unstuck when the handlebar turns
sharply left or right. Please test that the cable does
not get tangled by testing the turning of the handle
bar before operating the electric bike on the road.
12
OPERATION AND ADJUSTMENT
