What’s in the Box
Specs & Features
• Max Speed: Up To 16 mph
• Max Range: Up To 12 miles
• Battery: 36V, 5.0Ah Lithium-Ion
• Motor: 250W Hub Motor
• Charger: 100-240V
• Charge Time: Up To 4 Hours
• Climbing Angle: Up To 15°
• Unfolded Dimensions: 40” × 16.5” × 42.5”
• Folded Dimensions: 40” × 16.5” × 15”
• Deck Size: 26” × 5.7”
• Handlebar Height: 42.5”
• Tire Size: 8”
• Weight Limit: Up to 235 lb
• Product Weight: 28 lb
• Recommended Age: 12+
Please Note: Images may not reflect exact appearance of actual product.
1. Get Started
1.1
Assembly
1.4
Operating the Element Pro
1.2
Battery Care Tips
1.3
Unfolding the Element Pro
1. Handlebar
2. Headlight
3. Release Lever
4. Front Tire
5. Kickstand
6. Deck
7. Rear Foot Brake
8. Rear Tire
9. Small Screw (×4)
10. Charger Model: CP4215
11. Charging Cable
Connecting the Handlebar:
• Connect the four plugs according to color. Make sure the plugs clip in
correctly. If you have any issues with the wires, please contact Jetson
Customer Support. Tuck any excess wire into the Stem Tube.
• Slide the Handlebar into the Stem Tube.
• Tighten using the four screws. Make sure the screws are tight and
the Handlebar is secure.
- Charging
- Charge Complete
1
2
3
Charging Port
6
Unclip
Connect
Screws
LCD
Display
Speedometer
Speed Mode
Lift Handlebars away from Deck.
Make sure the Release Lever and
Handlebars are secure. Unlock
the Release Lever to fold.
Unclip the hook from the Rear
Foot Brake.
Lock the Release Lever by lifting
it up until it clicks.
Release Lever
7
8
• Only use the included charger.
• Plug the charger into the wall before the Charging Port.
• Don’t turn on the Element Pro while it’s charging.
• Charge the battery until it is fully charged - up to 4 hours.
• Replace the cover over the Charging Port when done.
•
Powering On
- Press the Power Button to turn on.
•
Powering Off
- Hold the Power Button for 2 seconds to turn off.
•
Speedometer
- Hold the Power Button for 6 seconds to switch
between mph and km/h.
•
Speed Modes
- Press the Power Button once to switch the speed modes.
•
Light Function
- Press the Power Button twice to turn on the headlight.
The light symbol will show on the LCD Display.
1 - Max speed
up to 10 mph
2 - Max speed
up to 13 mph
3 - Max speed
up to 16 mph
2. Make Moves
2.1
Riding the Element Pro
• Place one foot in front.
• Place the other foot in back, at a 70-90° angle.
• Turn the handlebar to the left or right to make turns.
4
5
CHARGING INDICATOR ON THE CHARGER:
Lights
0-20% 20-35% 35-50% 50-65% 65-80% 80-100%
1
(Solid Light)
1
(Flashing Light)
2
3
4
5
Percentage
BATTERY LEVELS
SPEED SETTINGS:
Battery
Indicator
10
11
9
Charging Temperature: 320 ~ 1040F
Operating Temperature: 320 ~ 1040F
Bolt
Small Screw
If the Release Lever becomes loose:
• Loosen the Small Screw with a 2 mm Hex Key.
• Use a flathead screwdriver to tighten and lower the Bolt.
• Press the Release Lever against Stem until it locks.
• Tighten the Small Screw.
2.2
Using the Thumb Throttle
2.3
Using the E-Brake
2.4
Using the Rear Foot Brake
Note
: Use the throttle
gently until you get
used to it.
Note
: Press down on
the E-Brake slowly to
avoid stopping abruptly
or losing control.
Press down to come to a complete stop.
*Adults must assist children in the initial assembly and adjustment procedures
to fold/unfold product and adjust handlebar to height.
Remember to be safe and
most importantly, have fun!
Note:
Tighten all screws and locking nuts before each ride to ensure
they are tight.
Warning: Failure to properly connect the plugs may cause the wires to smoke.
