Jets™ Opal Wall Toilet
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. TO615PO
Doc. Rev.: 4 (2019-01-18)
7
9
Fit the fastening kit to the mounting
bolts.
10
Note that two M12 nuts are
required to secure the toilet (not
supplied in the standard
delivery). Secure the nuts firmly
without over tightening.
11
Apply the cap's over the nuts.
12
Apply the coaming between the
finished wall surface and the
toilet bowl.
13
Slide the seat and cover onto the
mounting plate until it clicks in place.
(illustrations of the seat and cover
may vary from your individual
purchase).
Note: Jets™ Opal Toilet is delivered
with the mounting plate already
installed and adjusted on the toilet
bowl.
14
Connect the water hose to the
nipple on the seat and cover.
15
Plug in the power connection for the
seat and cover. Refer to the
manufacturers manual for operation
instructions, important safeguards,
safety information and maintenance
information for this product.
16
Completed.
17
Function Check to be Completed Prior to Use
1. Check that the inside of the toilet bowl is empty of packaging
material, etc.
2. Ensure that the discharge valve has been securely connected to the
outlet pipe.
3. Check that the water supply is connected and water pressure is
adequate.
4. Turn on the water supply.
5. Press the release button to activate the valve.
6. Check that the bowl fills with water.
7. Check that sufficient vacuum is created when activating the release
button to release the contents of the bowl.
8. Check that the water level in the bowl is restored.
9. Check that water is dispersed on the bowl surface by the flushing
mechanism.
10. Check that there are no water or air leaks.
