Instructions manual: MULi6s Module
5.2.
Telemetry Min/Max
•
Clear MIN / MAX switch
- Assigns the controller to the DC / DS transmitter, commanded to
erase the minimum and maximum MULi6s Module.
•
Clear now
- instantly reset the minimum and maximum MULi6s module.
•
MIN / MAX Trigger
- setting the voltage value, at which the minimum and maximum will be
reset when the sensor is switched on for the first time.
•
Total voltage MIN
- shows the total minimum battery voltage measured over the entire flight.
•
Total voltage MAX
- Displays the total maximum battery voltage measured over the entire flight.
•
MIN of the weakest cell
- Displays the minimum voltage of the weakest cell for the entire flight
time and the cell number.
•
MAX Difference
- Displays the greatest voltage difference between the weakest and strongest
cells throughout the flight. In addition to the voltage, which of the two cells this difference affects,
the first number corresponds to the strongest cell.
•
MIN/MAX Telemetry of all cells
- displays all connected cells and their minimum and maximum
voltage.
6.
Firmware Update:
MULi6s Module allows you to update your firmware via your computer. Updates are done via the JETI USB
Adapter.
Procedure:
•
On the website www.jetimodel.cz in the download section, you will find a program for
updating with the latest firmware. Save it to your computer.
•
Connect the USB adapter to the computer. The procedure of installing drivers for the USB
adapter is to be found in the user manual for the USB adapter. Run the firmware update
program on your PC.
•
Run the firmware update program on your PC.
•
Connect the USB adapter with a 3-wire cable to the Ext port on the MULi6s Module
(black JR connector).
•
The program identifies the connected device and automatically updates.
10
