JETI model Mezon Pro, User Manual, Page: 17 / 60

P
R
O P
R
O
MEZON PRO regulators are very powerful controllers for a wide variety of
applications. They come with strong BEC or optocoupler, full
JETI Duplex EX
telemetry and programmability of JETI Duplex DS / DC transmitters via the
device manager. All programming steps are in German/English. Even
forward / reverse operation of the motor is possible with this controller. In
addition, the throttle channel can optionally be used from the
EX Bus of the
receiver. A separate output pin at the Rx for a throttle channel is therefore
not necessary, telemetry and control signals are transferred to the receiver
via only one cable.
Product description and features
•
Compact size
•
Setting via the Device Explorer of the JETI DC / DS transmitter
•
Real-time Telemetry JETI Duplex EX Bus (perfect for JETI DC / DS transmitters)
•
Telemetry data: battery voltage, battery c BEC current, used battery capacity, RPM, PWM,
controller temperature
•
Telemetry data reset by switch from the transmitter
•
Powerful BEC, ideal when using JETI Assist or other gyro systems in a model
•
BEC with a wide input voltage range and adjustable output voltage
•
Activation of the throttle channel from the EX B us is possible; the receiver then does not have to
offer its own slot for the throttle channel .
•
Programmable with JETI Box
•
Operating modes: Model aircraft, forward / reverse operation
•
Proportional brake with a definable braking point at the throttle stick
•
F3A brake conveniently adjustable via the device overview
•
Heat sink for long engine run times
•
High efficiency
•
Firmware upgrade possible
•
Wide range of adjustable parameters
Controller Mezon Pro
1 Introduction
English
EN
P
R
O P
R
O
17