positions, out off – output switched off, FailSafe – transition to preset
throw positions of individual outputs which
may be set up in the FailSafe menu.
-FailSafe: throw setup of a selected output in case of signal loss
-Delay: delay of servo speed (at the output) in case of a change at the
input, the entry time corresponds with
the transit time within the output range between 1ms to 2ms which,
for instance, may be suitable for
retracting a landing gear
-Curve: Setup of a channel output curve
-ATV High Limit: restriction (reduction) of the maximum throw of a
particular output (half plane B)
-ATV Low Limit: restriction (reduction) of the maximum throw of a
particular output (half plane A)
-Output Group: setup of a particular output for a selected group of
output pulses, which are generated by the
receiver at the same time . See page 56.
Auto Set: complete receiver preset for predefined functions. After
selection of the desired function the receiver
setup is executed by simultaneous pressing of the left and right
JETIBOX keys for about 3 seconds.
-Normal: basic setup, mixers switched off, individual input channels
are affiliated to corresponding outputs, i. e.
input CH1 is affiliated to output Y1 etc.
-MixCH1&CH2 Elevon: affiliates the mix of the received CH1 and CH2
to the output channels Y1 and Y2
-MixCH2&CH4 V-Tail: affiliates the mix of the received CH2 and CH4 to
the output channels Y2 and Y4
For receivers we grant a warranty of 24 months from the day of
purchase under the assumption
that they have been operated in conformity with these
instructions at recommended voltages
and that they were not damaged mechanically. Warranty and
post warranty service is provided
by the manufacturer.
“This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm
between the radiator and your body. This transmitter must not
